The Uwell Caliburn G3 is a compact refillable pod system with a 900 mAh built-in battery, USB-C charging, adjustable wattage up to 25 W and a screen that shows your battery level, wattage, resistance and puff count. It runs on side-refill G3 cartridges with mesh coils built in, which is a big change from the pods older Caliburns used.
Because the coil is part of the cartridge, there's no separate coil to seat. You fill the cartridge, let it soak, click it in and go. When the flavor fades, a fresh cartridge goes in. Specs here come from Uwell's Caliburn G3 page and its Caliburn GK3 page.
Who is the Caliburn G3 for?
The G3 is a good fit if you want something pocket-sized and rechargeable where the coil lives in the cartridge. Its closest relative is the Caliburn GK3, which uses the same cartridges in a retro-styled body. The older Caliburn G is a simpler, lower-powered device with a top-fill pod and a replaceable coil. And if you're after a bigger pod and a lot more power, the Uwell Crown X is the step up.
Uwell Caliburn G3 at a glance
| Detail | Information |
|---|---|
| Battery | 900 mAh (Uwell also shows a 750 mAh figure for some versions) |
| Maximum output | 25 W |
| Charging | USB-C, 2A fast charging |
| Display | Screen with battery, wattage, resistance and puff count; Uwell lists an OLED screen on some versions |
| Cartridge capacity | 2.5 ml, or 2 ml for TPD versions |
| Cartridge resistances | 0.6, 0.9 and 1.2 ohm FeCrAl mesh, built in |
| Fill | Side refill |
| Airflow | Dual airflow system |
| Firing | Fire button with trigger modes; powers off automatically after 8 minutes |
| Technology | Pro-FOCS flavor technology |
One thing worth knowing: Uwell's G3 page shows both 750 mAh and 900 mAh in different spec blocks, along with lengths of 115.5 mm and 120 mm, without spelling out which goes with which version. The box on your unit will tell you which one you have.
What cartridges does the Caliburn G3 use?
The G3 takes Caliburn G3 cartridges, each with its own FeCrAl mesh coil. Uwell lists three resistances:
- 0.6 ohm, the lowest of the three, for a more open draw at higher wattage
- 0.9 ohm, right in the middle
- 1.2 ohm, the highest, for a tighter mouth-to-lung style draw
The cartridges are made from PCTG, and the device body is aluminum alloy. Since the coil is inside the cartridge, the whole cartridge gets replaced when the coil wears out. Uwell also mentions a top-refill cartridge with some kits, but each kit comes with just one refill type, so check which kind yours has before you pick up more.
What do "mesh" and "Pro-FOCS" mean?
A mesh coil uses a flat, woven metal sheet instead of a wound wire, so it heats over a larger area. Pro-FOCS is Uwell's name for the flavor technology it uses across its coils. Neither one is a measurement; they just tell you how the coil is built.
How do resistance and airflow work together?
Lower resistances like 0.6 ohm usually go with a more open draw and higher wattage, while higher ones like 1.2 ohm go with a tighter draw and lower wattage. On top of that, the G3's dual airflow lets you open things up or tighten them down. With wattage adjustable up to 25 W, the range printed on each cartridge's package is the one to follow.
How does the G3 compare with other Caliburns?
| Model | How it relates |
|---|---|
| Caliburn G3 | 900 mAh, up to 25 W, G3 cartridges |
| Caliburn GK3 | 900 mAh, 25 W, same G3 cartridges, retro styling; see the GK3 guide |
| Caliburn G | Older design: 690 mAh, 18 W, top-fill pod with a replaceable coil |
| Caliburn A3 | Uses its own A3 pods, not G3 cartridges |
How do you set up and charge the G3?
- Charge it first. Plug into the USB-C port with a standard cable.
- Fill a cartridge from the side. Open the side port, add e-liquid and close it up.
- Let it rest. Give the coil several minutes to soak.
- Click in the cartridge and set your wattage within the range printed on the package.
Uwell lists 2A fast charging, but the real speed also depends on your cable and power source. Use a cable in good shape, charge on a hard surface and unplug once it's full. Store the G3 upright when you can, wipe the contacts dry now and then, and don't leave it in a hot car, where heat is rough on both the battery and the e-liquid. For more, see How to Extend the Life of Your Vape Battery.
What if the draw or screen seems off?
If the flavor drops, the cartridge is the first suspect, since the coil is inside it. If the device won't fire, check the charge and make sure the cartridge is fully seated. And if the screen shows a resistance you didn't expect, double-check that you're using a G3 cartridge and not a pod from another Caliburn.
When you come in for cartridges, it helps to know the model name on your device, the resistance printed on your cartridge (0.6, 0.9 or 1.2 ohm), whether it fills from the side or the top, and whether it's the 2.5 ml or 2 ml TPD size. With those four details, our staff can match a cartridge in seconds.
Caliburn G3 FAQ
Can I use older Caliburn pods in the G3?
No. The G3 takes Caliburn G3 cartridges only.
Is the Caliburn G3 rechargeable?
Yes, it charges over USB-C.
Is the G3 the same as the GK3?
They use the same G3 cartridges, but they're separate models with different styling.
Can I find the G3 at my local Cloud 9?
Selection varies by store, so use the Cloud 9 store locator and call ahead about the device or cartridge you want.
Where to find the Uwell Caliburn G3 near you
Cloud 9 Smoke Co. is a family-owned shop founded in 2012, with more than 50 locations across Georgia and Florida. Find your closest store with the Cloud 9 store locator, or browse our Georgia locations and Florida locations.
More reading: our Caliburn GK3 guide and How to Extend the Life of Your Vape Battery.
For adults 21+.
